Description
Leather strap blanks cut from premium Italian vegetable-tanned leather give you a pre-cut strip to work with. At 2.2–2.4 mm thick, they suit bag straps, handles and small leather tabs. You can trim each blank to length, shape the ends and finish the edges to suit your project.
Choosing leather strap blanks for your project
For a bag strap, measure the inside width of your buckle, slider or swivel snap. Choose a strap width that fits through the hardware. If the leather needs to fold around a ring, leave extra length for the fold and the stitching or rivets.
For a pair of handles, use the same template for both pieces. Mark the ends and hole positions before you cut or punch. This helps both handles sit at the same height when you fit them.
Strap blank specifications
- Thickness — 2.2–2.4 mm
- Material — Premium Italian vegetable-tanned leather
- Format — Pre-cut strap blank
- Suggested uses — Bag straps, handles and leather tabs
Trimming and finishing the edges
First, trim the blank to length and shape the ends. Next, mark and punch the holes your design needs. For a rounded edge, lightly bevel the leather before burnishing. You can also use edge paint to match the colour of your bag or hardware.
Before you dye, stamp or burnish the strap, try your finish on an offcut. This lets you check the colour and edge finish before you work on the visible part of the strap.
Fitting hardware to folded ends
Two layers of 2.2–2.4 mm leather measure about 4.4–4.8 mm before compression. If you add a lining or reinforcement, measure the full stack before choosing your rivets or other fasteners. Check the fit with your hardware before punching the final holes.
These leather strap blanks let you choose where the holes go, how the ends are shaped and how the edges are finished.

















Reviews
There are no reviews yet.