Description
Leather strap blanks in black full grain leather are 2–2.2 mm thick. Use them to make bag straps, handles and attachment tabs, or to replace a worn strap. The pre-cut format gives you a starting point for trimming, punching and fitting your hardware.
Choosing leather strap blanks for your project
For a replacement strap, measure the old strap from end to end. If it has an adjustable buckle, note where the most-used hole sits. That gives you a reference for marking the holes on the new strap.
Measure the inside width of your buckle, ring or clip before choosing a strap width. For a handle that folds around a ring, check the clearance where the leather doubles over. For a new bag strap, allow extra length for the folds at both ends before you cut.
Product specifications
• Thickness — 2–2.2 mm
• Material — Full grain leather
• Colour — Black
• Format — Pre-cut strap blank
• Uses — Bag straps, handles, attachment tabs and repairs
Cutting and finishing the strap
Mark the finished length and hole positions, then check them against your fittings. If you’re making a pair of handles, use the first piece as a template for the second. Test your edge finish on an offcut to see how it looks against the black leather.
Can I use these to replace a bag handle?
Yes, if the blank suits the original handle’s width, thickness and attachment points. Check how the handle connects to the bag. It may fold over a ring, sit inside a fitting or stitch directly to the bag. If you’re reusing the fittings, test the fit before cutting or punching the new handle.
Before ordering leather strap blanks, check the width at the narrowest fitting and allow enough length to attach both ends.
















Reviews
There are no reviews yet.