Description
Sedgwick Bridle Leather in black is a pre-cut blank for making a belt to your own measurements. At 3.5–4mm thick, it gives you a substantial strap for everyday wear. You can also use it to replace a worn belt strap and keep your existing buckle.
Sedgwick Bridle Leather Specifications
- Brand: Sedgwick
- Colour: Black
- Thickness: 3.5–4mm
- Supplied as: Pre-cut belt blank
Choose the Right Width
First, measure the inside width of your buckle where the strap sits. For example, if that space measures 38mm, look for a 38mm blank. If you’re replacing a belt strap, you can also measure the old strap for reference.
Next, check that the blank will fit through your belt loops. Also check the thickness where the leather folds around the buckle bar. The fold creates two layers of leather, so make sure your keeper and fasteners can fit over both layers.
Measure and Finish Your Belt
Start with a belt that fits well. Measure from the end of the buckle pin to the hole you use most often. Then use that measurement to mark the main hole on your new strap.
Before you cut, check your marks with the buckle in place. Leave enough leather for the fold at the buckle end and for the tip at the other end. Once you’re happy with the fit, trim the blank, shape the tip and punch the adjustment holes.
Finally, if you’re trying a new edge finish on Sedgwick Bridle Leather, test it on an offcut first. This lets you check how it looks before you apply it to the belt.












Reviews
There are no reviews yet.