1 Litre MR MAC Leathercraft Antique Finish

Description

1 Litre MR MAC Leathercraft Antique Finish

MR MAC Leathercraft Antique Finish is a water-soluble leather colouring and highlighting product designed to bring out the detail in carved, tooled and stamped leather. It settles into recessed areas, impressions and decorative patterns, creating attractive contrast and greater visual depth.

Best suited to raw, natural and vegetable-tanned leather, this antique finish can be built up gradually until the desired colour and highlighting effect is achieved. Its generous 1 litre size is ideal for regular leatherworkers, saddlers, craft studios, leathercraft classes and larger projects.

Unlike a simple surface colour, the finish helps define basketweave patterns, borders, lettering, floral carving, geometric stamping and other decorative leatherwork. The excess is wiped from the raised areas while colour remains in the deeper impressions, making the pattern more prominent.

Specifications

• 🧴 Size: 1 Litre
• 🎨 Product Type: Leather antique finish
• 💧 Formula: Water-soluble
• 🐄 Suitable Leather: Raw, natural and vegetable-tanned leather
• ✨ Effect: Colours leather and highlights recessed patterns
• ⚙️ Application: Apply lightly, allow to partially dry and wipe away the excess
• 🖌️ Buildable Colour: Repeat the application to increase colour depth
• 🛡️ Sealer: No additional sealer is required for normal use
• 👜 Ideal For: Tooling, stamping, carving and decorative leatherwork
• 🇦🇺 Brand: MR MAC

How to Apply MR MAC Antique Finish

Ensure the leather is clean, dry and free from dust, oils or other surface contamination. For the most predictable result, test the antique finish on a scrap piece or an inconspicuous section of the same leather before treating the complete project.

Apply a light, even coat using a sponge, soft cloth, applicator pad or suitable brush. Work the product thoroughly into the carved, stamped and recessed sections of the leather.

Just before the finish dries, wipe the excess from the raised and surrounding areas with a clean cloth. This leaves more product in the lower sections, creating contrast and highlighting the pattern.

Allow the leather to dry before assessing the final appearance. Additional light coats can be applied to build a deeper colour or stronger antique effect. Repeat the process until the preferred level of colour and highlighting is achieved.

Applications

MR MAC Leathercraft Antique Finish is suitable for highlighting decorative details on:

• Tooled leather belts
• Wallets and card holders
• Handbags and satchels
• Saddlery and horse tack
• Knife sheaths
• Holsters and pouches
• Leather journals
• Stamped straps
• Decorative leather panels
• Western leathercraft
• Floral and basketweave carving
• General vegetable-tanned leather projects

Finishing the Leather

There is no need to apply an additional sealer for normal use. However, a compatible leather lacquer or Seal & Shine may be applied after the antique finish has dried completely when a glossier appearance or additional surface finish is desired.

Always test any finishing combination on an offcut first, as the final shade and appearance can vary depending on the leather, preparation, application method and number of coats.

Why Choose MR MAC Leathercraft Antique Finish?

MR MAC Leathercraft Antique Finish offers a straightforward way to colour natural leather while drawing attention to detailed tooling and stamping. Its buildable application gives the leatherworker greater control over the finished depth and contrast.

The water-soluble formula is practical to apply, while the 1 litre container provides excellent coverage for frequent use or larger leathercraft projects. It is an ideal choice for leatherworkers who want carved and stamped patterns to stand out with a traditional antique appearance.

Frequently Asked Questions

What leather is this antique finish best suited to?

It is best applied to raw, natural or vegetable-tanned leather, particularly leather featuring carving, stamping or tooling.

Does it highlight stamped leather?

Yes. The product remains in recessed impressions after the excess is wiped from the raised surface, helping stamped and tooled patterns appear more defined.

Can I apply more than one coat?

Yes. Apply additional light coats to gradually build the colour and increase the highlighting effect.

Does the leather need to be sealed afterwards?

An additional sealer is not required for normal use. A compatible lacquer or Seal & Shine can be applied once fully dry if a glossier finish is preferred.

Will the colour look the same on every piece of leather?

Results can vary according to the leather type, surface preparation, absorbency and application technique. Always test the product before completing the entire project.