25mm Brass-Plated Swivel Snap

Description

The 25mm brass-plated swivel snap gives handbags and shoulder bags a warm brass finish. Use it to make a detachable strap for a new bag or replace a worn clip on an existing one. The snap clips onto the bag’s attachment ring, while the swivel lets the strap turn as the bag moves. This helps reduce twisting during everyday use.

The brass plating pairs well with tan, cognac and dark brown leather. It also stands out against black leather. For a coordinated finish, pair the snap with brass-colour D-rings and, if you’re making an adjustable strap, a matching slider.

25mm Brass-Plated Swivel Snap Specifications

• 📏 Strap width – 25mm (1 inch)
• ✨ Finish – Brass plated
• ⚙️ Style – Swivel snap clip
• 👜 Suits – Handbag straps, shoulder straps and general leathercraft
• 🏷️ Product code – 3665-00

Uses for This Swivel Snap

• Handbags – Make a removable shoulder strap that clips onto the bag’s D-rings.
• Crossbody bags – Fit a snap at each end so you can swap between short and long straps.
• Bag repairs – Replace a worn clip on a compatible leather or webbing strap.

How to Check the Fit

Measure across the end of the strap where it will pass through the swivel loop. If you’re replacing a clip, check whether the strap end is stitched or riveted before removing the old fitting. Also check that the snap opening fits over the bag’s attachment ring, especially if the ring is thick.

Frequently Asked Questions

Can I use the 25mm brass-plated swivel snap with webbing?

Yes. Use 25mm webbing that fits through the strap loop and can fold back for secure stitching. Check the fit before sewing, particularly if the webbing is thick.

How many snaps do I need for a detachable bag strap?

Use two if you want both ends of the strap to unclip. For a repair, you can replace one clip if the other end is still in good condition.