38mm Premium Venice Polo Belt Blanks – Hand-Stitched Leather

SKU: 6137-00

$26.95

In stock

Venice polo belt blanks feature a hand-stitched pattern in brown, cream and white.

📏 38 mm wide, approximately 3.5 mm thick and at least 120 cm long

• 🧵 Made from one piece of genuine leather

• 🧵 Brown, Cream and White with dark brown leather belt

Capped Shipping Rates

Australia-wide standard shipping capped at $22.
Lower rates available for smaller orders.

Description

Venice polo belt blanks feature a hand-stitched pattern in brown, cream and white. Each blank is made from one piece of genuine leather. Choose your own buckle and punch the tip holes to suit the wearer.

Venice Polo Belt Blanks at a Glance

  • Width – 38 mm
  • Thickness – approximately 3.5 mm
  • Minimum blank length – 120 cm before fitting
  • Material – one piece of genuine leather
  • Stitching – brown, cream and white, stitched by hand
  • SKU – 6137-00

Choose a Buckle to Fit

Choose a buckle with an inside width that fits a 38 mm strap. Check that the leather fits through the buckle and leave enough room to fold the leather at the buckle end.

Measure and Punch the Tip Holes

Start with a belt that fits well. Measure from where the buckle pin rests to the hole you use most. Once you’ve positioned the buckle on the new blank, use that measurement to mark the centre hole.

Then mark the remaining holes at even intervals. Before you trim the tip or punch the holes, check where the stitching ends so you can keep the pattern intact.

Additional information

Weight 0.19 kg
Dimensions 15 × 15 × 4 cm

Reviews

There are no reviews yet.

Be the first to review “38mm Premium Venice Polo Belt Blanks – Hand-Stitched Leather”

Your email address will not be published. Required fields are marked *