Description
Sedgwick Bridle Leather in Australian Nut is a pre-cut blank for making your own belt. The leather is 3.5–4 mm thick, giving you a substantial strap for an everyday or dress belt. Choose your buckle, trim the blank to fit and finish the tip and edges to suit your design.
Sedgwick Bridle Leather specifications
- Thickness: 3.5–4 mm
- Colour: Australian Nut
- Brand: Sedgwick
- Product type: Pre-cut leather belt blank
Choose the right width for your buckle
If you already have a buckle, measure the inside opening where the strap sits. Select a blank that matches that width. If you’re ordering a buckle too, check the strap width listed on the buckle page.
Measure before you cut
Start with a belt that fits well. Measure from where the buckle prong rests to the hole you use most often. Use that measurement to mark the centre hole on your new belt.
Before you trim the blank, leave enough leather for the buckle attachment and the tip. If the leather will fold around the buckle, test the fold with your hardware before punching the fixing holes.
Shape the tip and finish the edges
Mark the tip shape before cutting. A rounded tip works well for an everyday belt. Once you’ve cut the tip, bevel the edges for a softer feel and finish them to suit the look you want.
Use this Australian Nut Sedgwick Bridle Leather blank to make a new belt or replace a worn strap while keeping your favourite buckle.















Reviews
There are no reviews yet.